Biomek i7 Hybrid NGS Workstation
|Platform||Biomek i7 Dual Arm Multi 96 and Span 8|
|Environmental Conditions||Maximum altitude: 2000 m|
|Power Requirements||10 A, 100-240 VAC, 50/60 Hz|
|Material(s)||Aluminum chassis, ABS Cover, Acrylic panels|
|Finish||High-gloss paint, Hardcoat anodized coating|
|Weight||225 kg / 496 lb|
|Width||170 cm / 66.9 in|
|Depth||81 cm / 31.9 in|
|Height||104 cm / 40.9 in|
|Humidity Restrictions||20%–85% (non-condensing) at 30°C|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.